- Products
- >
- i2c cable - reversed
i2c cable - reversed
SKU:
i2c20r
$3.00
$3.00
Unavailable
per item
"Reversed" i2c jumper cable designed to connect between modules that use the less common pin ordering for their i2c connectors (SCL-SDA-GND). 1x3 pin connectors on each end.
Reversed cables are marked with yellow (or red) shrink tubing. Ground is marked with a black stripe on the side.
Modules using this pin ordering include the ER-301 and Matrixarchate.
ER-301 users please note - "These swapped cables are only necessary for ER-301 with the older revision 7 hardware"
Comes in two lengths (20cm and 30cm)
30cm available soon
Sold out